1000A AC/DC True RMS Digital Clamp Meter

Bahco

Simple meter with current clamp for essential electrical tasks such as measuring AC/DC voltage or current, frequency, resistance, capacitance, continuity, polarity and temperature. 45mm jaw opening for measuring current without opening the electrical circuit. True RMS measurement <1KHz. Voltage up to 1000V DC and AC (CAT II) Backlit 1.8" LCD screen for accurate reading Measurement ranges: o Voltage: - DCV: 400.0mV/4.000V/40.00V/400.0V/1000V 0.5% + 5 counts - ACV: 4.000V/40.00V/400.0V/1000V 1% + 5 counts o Current: - DCA: 400.0A/1000A 2.5% + 6 counts - ACA: 400.0A/1000A 3.0% + 8 counts o Resistance: 400.0Ω/4.000KΩ/40.00KΩ/400.0KΩ/4.000MΩ/40.00MΩ 0.5% + 3 counts o Capacitance: 4.000nF/40.00nF/400.0nF/4.000uF/40.00uF/400.0uF/4.000mF 3% + 15 counts o Continuity: 200Ω < 50Ω beep o Diode test: 2V o Frequency: 4.000Hz/40.00Hz/400.0Hz/4.000KHz/40.00KHz/400.0KHz/4.000MHz 0.1% + 5 counts o Temperature: -200 ~ 1200°C o Non contact voltage sensing: > 50VAC 50/60Hz Polarity indication. Auto/manual range. Overrange indication: "OL" display. Data hold mode. Max/Min function. Relative value function: Yes. Auto Power Off function. Low battery indication. Battery: 3 x AAA 1.5V Temperature range: Operating: 0 ~ 40°C / Storage: -10 ~ 60°C Set includes o Alligator clip test probe leads, spring-loaded copper clips with wide 12.7 mm (0.5 inch) jaw opening and serrated teeth, 1m long. o Needle probe set with silicone leads 1m long. o Temperature sensor probe lead 1m long. o Quick guide o Calibration report o Bag with strap holder CAT category: CAT II 1000V - CAT III 600V LVD: EN 61010-1 EN 61010-2-030 EN 61010-031 EN 61010-2-032 EN 61010-2-033 EMC: EN 61326-1