4 Port Fast Ethernet Smart Poe Switch

Hikvision

4 × 100 Mbps PoE RJ45 ports, 2 × 100 Mbps network RJ45 ports IEEE 802. 3at/af/bt standard for PoE ports Network topology management, and alarm push 6 KV surge protection for PoE ports Up to 300 m long-range transmission AF/AT camera can reach up to 300 m in extend mode. ShellMetal material, IP40, Net Weight0. 245 kg (0. 54 lb), Gross Weight0. 645 kg (1. 42 lb), Dimensions (W × H × D)145. 0 mm × 25. 6 mm × 68. 45 mm (5. 7" × 1. 0" × 2. 69"), Operating Temperature0 °C to 40 °C (32 °F to 104 °F), Storage Temperature-40 °C to 85 °C (-40 °F to 185 °F), Operating Humidity5% to 95% (no condensation), Relative Humidity5% to 95% (no condensation), Power Supply48 VDC, 1. 35 A, Installation ModeDesk-Mounted, Wall-Mounted, Max. Power Consumption65 W, Power Consumption in Idle2 W, Surge Protection6 KV, Ports4 × 10/100 Mbps PoE port, 2 × 10/100 Mbps RJ45 port, MAC Address Table2 K, Switching Capacity1. 2 Gbps, Packet Forwarding Rate0. 90 Mpps, Internal Cache768 Kbits, PoE StandardIEEE 802. 3af, IEEE 802. 3at, IEEE 802. 3bt, PoE Power Pin8-pin power: 1/2(-), 3/6(+), 4/5(+), 7/8(-), PoE PortHi-PoE: Port 1PoE: Ports 2 to 4, Max. Port PowerPort 1: 60 W Ports 2 to 4: 30 W, PoE Power Budget60 W, Long RangePorts 1 to 4: up to 300 m. Long range performance may vary depend on camera model or cable condition, VIP PortPorts 1 to 2: data on VIP ports is preferentially forwarded when bandwidth resources are insufficient, PoE WatchdogPorts 1 to 4: auto detect and restart the cameras that do not respond, HPPSupport one-click activation and remote management via Hik-Partner Pro. Functions supported:1. Display the port rate. 2. Display the port bandwidth utilization rate. 3. Display the PoE power usage. 4. Display topology information. 5. Display the alarm status. 6. Restart ports and devices. 7. Enable port long-rage mode. 8. Remotely upgrade the device, System MaintenanceSupport device management via web. Support DHCP Client. Enabled by default for dynamic assignment of management IP addresses. Support Super IP, which is a fixed IP address (10. 180. 190. 200) for direct access. Support management via Hik-Central Pro. Support remote management via Hik-Partner Pro. Support cable detection. Abnormal open circuits and short circuits as well as network cable length can be detected. Supports 802. 1ab LLDP for peer device discovery. Support SNMP v1/v2c for third-party management platform access. Support port mirroring for fault locating, EMCFCC (47 CFR Part 15, Subpart B); CE-EMC (EN 55032: 2015, EN IEC 61000-3-2: 2019, EN 61000-3-3: 2013+A1: 2019, EN 50130-4: 2011 +A1: 2014, EN 55035: 2017); IC (ICES-003: Issue 6); RCM (ASNZS CISPR 32: 2015), SafetyUL (UL 60950-1); CB (IEC 60950-1:2005, AMD1:2009, AMD2:2013, IEC 62368-1: 2014 (Second Edition); CE-LVD (EN 60950-1: 2006 + A11: 2009 +A1: 2010+A12: 2011+A2: 2013, EN 62368-1: 2014+A11: 2017), ChemistryCE-RoHS (201165EU); WEEE (201219EU); Reach (Regulation (EC) No. 19072006),