EPDM Adhesive

Affixit

EPDM Membrane Adhesive High Tack, Polymer Based High Viscosity EPDM Adhesive With Low Solvent Content. Adheres EPDM & Butyl Membranes to Hard PVC, Aluminium, Steel, Galvanised Steel, Acrylic Glass, Concrete, Light Weight Concrete, Lead, Wood & Bitumen This paste adhesive allows the position of the strip to be adjusted. Application Instructions: Paste Adhesive 3300 is applied on substrate with standard type of hand or electric gun or putty spade. Apply the paste in 2-3 beads to the substrate. Wait a couple of minutes before fixing the membrane into the paste. Spread the paste or apply the EPDM membrane directly over the beads so that a 1 mm thick layer of adhesive is covering a width of approx 100 mm. Apply pressure using a silicone or steel roller. When adhering vertically the paste shall be applied and pressed until a 1 mm bead is visible outside the membrane edge, to seal the splice. Make sure that the strip is applied without building in tension and stress to the splice. Seams between strips must have a minimum overlap of 100 mm, bonded together with paste adhesive. The paste shall be applied and pressed until a 1 mm bead is visible outside the membrane edge, to seal the splice. Note: Paste adhesivemust not be applied in temperatures below 5°C. Warning: Paste Adhesive is flammable. Avoid open flames. Each 600ml Foil Produces 10 Meters of Bead (average use is 3 600ml foils per Roll)